India Mark II Deepwell Hand Pumps

Pump Type: As per the Indian Standard of Bureau the Pump is an India Mark ii Deep Well Hand Pump

Specifications: Brass Sleeved Cylinder assembly has 63.5mm dia of cast iron.

Minimum ID of bore (millimeter): 100

Approximate Discharge (Liters/Hour): 900

Cylinder Stroke Length: 125 ± 4 mm

GI Riser Pipe: 32 mm NB * 3 meter length

MS/SS Connecting Rod Diameter: 12mm * 3 meter length

Afridev Deepwell Hand Pumps

Pump Type: It has a 50mm dia open on the top, a cylinder assembly with extractable plunger and foot valves assemblies. It is as per SKAT-HTN

Recommended for water level setting depth (meters) : upto 45 Meter

Minimum ID of bore (millimeter): 100

Approximate Discharge (Liters/Hour): 990

UPVC Riser Pipe : 63mm OD * 4.7mm Wall Thickness * 3 Meter length

MS/SS Connecting Rod Diameter : 10mm
(12mm Dia can loaded also be supplied)

Stroke Length : 225± 6mm
.

India Mark III (VLOM 65) Deepwell Hand Pumps

Pump Type: as per Bureau of Indian Standard specification it is 63.5mm dia has cast iron brass sleeved open top. It is an India Mark III Deep Well Hand Pump.

The water level has a depth of (meters):20*45

Minimum ID of bore (millimeter): 125

Approximate Discharge (Liters/Hour): 900

Cylinder Stroke Length : 125 ± 4 mm

GI Riser Pipe : 65 mm NB * 3 meter length

MS/SS Connecting Rod Diameter : 12mm * 3 meter length

India Mark III (VLOM 50) Deepwell Hand Pumps

Pump Type: According to Bureau of Indian Standard India Mark III well Hand pump has a 50 mm dia cast iron brass which has a sleeved open cylinder assembly.

The water level recommended for setting depth (meters) : 20*45

Minimum ID of bore (millimeter): 100

Approximate Discharge (Liters/Hour) : 600

Cylinder Stroke Length : 125 ± 4 mm

GI Riser Pipe : 65 mm NB * 3 Meter length

MS/SS Connecting Rod Diameter : 12mm * 3 Meter length

U3 Modified Deep Well Hand Pump

Pump Type: As per SKAT-HTN Switzerland U3 is a modified Deep Well Hand Pump which has a diameter of 50mm open top. It has a brass lined cylinder assembly which is of UPVC with an extractable plunger and foot valves assemblies.

Recommended for water level setting depth (metres): 20-45

Minimum ID of bore (millimetre): 100

Approximate Discharge (Litres/Hour): 600

UPVC - Riser Pipe 63 mm ODX 4.7wt*3meters length.

MS/SS Connecting Rod Dia : 12mm

Stroke Length : 125 ± 5mm

Force Lift Pump System

It has a motorized Conversion Kits/ Attachments which are used in Deepwell Pumps. To deliver water up to a height of 15 meters from the ground level the Force Lift Pump System/ Arrangement is designed.

Pump Type:
MS/SS Connecting Rod Diameter : 12mm

Indiamark II Extra Deep Well Hand Pump

Pump Type: According to Indian Standard specifications the India Mark II Extra Deep Well Hand Pump has a 63.5mm Cast Iron Brass with a sleeved cylinder assembly

Recommended for water level setting depth (metres) : 45-90 Meters.

Minimum ID of bore (milimetre) : 100 mm

Approximate Discharge (Litres/Hour) : 720 mm

Cyclinder Stroke Length : 100 ± 4 mm

GI Riser Pipe : 32 mm NB * 3 meter length

Cast Iron Cylinder Assembly For INDIA Mark–II Pumps (Also Available In Stainless Steel)

It consists of a seamless brass liner of 63.5mm ID and it has gun metal components and nitrite rubber cup seals. It has a body of cast iron. It discharges 0.37 liters per stroke.

Tool Kits & Spare Parts For different Hand Pumps 

We at Apex International specialize in manufacturing Hand Pump Tool Kit, Pipes and there spare Parts. We develop products which are of international standards. We work hard for the development of our products and for the satisfaction of our clients.We are very flexible, simultaneously have a quite competitive advantage especially in organizing the source of goods, quality control, transportation arrangement, and declaration commodity inspection etc.